Error Codes
EC12 - Stop Position Error
Solution - Turn the main shaft wheel to 100 degree or Press the 100 icon in the control panel and confirm. EC13 - Frame Over Limit Solution - Because the parameters "Set Frame Protection" has been set and it is over the set range at moving the frame, user can release this parameter according to the situation. EC14 - Control Memory Lost EC16 - Step Motor Error Solution - 1- Check whether the frame is blocked 2- Make sure the frame motor is OK. 3- Exam whether the drive is damage. 4- Re Power the machine. EC17 - Change clr Overtime. Solution - 1- Check whether the color-changing is rotating 2- If it can rotate, please check the color changing rheostat, and the connection between that rheostat and color change motor. EC18 - Half Return Error. Solution- 1- Use Color Changing wheel to correct the position of the needle. 2- Check whether the color change motor is damage EC20 - Main Motor Overtime This error can be different things. 1-Normally this error appears for obstruction in the main shaft because the lack of oil or something got stuck in the rotary hook Solution - Turn the main shaft black knob to verified that there is no obstruction. If there is obstruction please inspect the machine to find the obstruction. Solution - Turn the main shaft black knob to verified that there is no obstruction. If there is obstruction please inspect the machine to find the obstruction. A- Inspect the rotary hook to see if there is obstruction there. B- Due to the lack of oil some metal with friction expand causing the machine to jam. Solution: Let the machine rest for 1 or 2 hours to see if the obstruction goes away, apply oil to all the oil points of the machine, check video https://www.youtube.com/watch?v=5pY1FvIjERA&t=45s -Another possibility is the 100 degree sensor : Inspect the sensor, clean the sensor or replace the sensor. check video. https://www.youtube.com/watch?v=r1Q9tMwq2NI&t=259s - Bad Motor : Replace the main motor - Bad EC21 - Change Clr Over Limit Solution - Check whether the color-changing rheostat is damaged and the whether the setting of "needles" is right. EC22 - Main Motor Reverse Solution - Check the 14P Plug on the main shaft motor encoder is loose or the rheostat is damage. EC23 - Can not Embroider EC24- Can not Frame Back EC26- Can not trim Solution- Check whether it is due to mechanical reasons or knife return detection is broken. EC37 - Pull Barr Error EC38 - Spe Emb. Overtime E41- File not Exist Solution - Re-Perform the operation or perform the operation after re power or perform "Clear All Memory Designs" EC42 - File Directory Full Solution - Delete some designs. EC43 - Memory Space Full Solution - Delete some designs. EC44 - File Fat Err Solution - Re-Perform the operation or perform the operation after re power or Perform " Clear All Memory Designs" EC45 - File Directory Error Solution - Re-Perform the operation or perform the operation after re power or Perform " Clear All Memory Designs" EC46 - Bad Disk Sectors Solution - Replace disk. EC95 - Thread is Broken, press key EC101 - Transfer crc Error Solution - Re Power the machine. |